- Network interface Ethernet 10/100Base-T, Modbus TCP Configuration via Telnet RJ45 connector
- Serial interface RS-485 Modbus RTU Master Baud rate up to 115.2 Kbps Distance up to 1200 m, up to 32 modules in multipoint
- Removable terminal connection
- Signalling LED Link/Act Ethernet, serial RX-TX, power supply
- Galvanic isolation on 3-way
- Compliant with standards CE+EMC
- Suitable for DIN rail mounting EN-50022
General Details
TU-RS485-TCP-3580MB – Modbus/TCP to Modbus RTU Protocol Converter
Communication module for connection via Modbus RTU RS-485 protocol over RS485 network
The TU-RS485-TCP-3580MB module allows connection of all devices with Modbus RTU RS-485 protocol on an RS-485 network, to the Ethernet network with Modbus TCP protocol.
The device is configured via the Telnet interface, where parameters for the Ethernet port and RS485 serial port can be set.
The module isolates the 2 networks, introducing valuable protection against disturbances found in industrial environments.
Modules can be mounted on DIN rails for maximum space utilisation.
LEDs indicating Ethernet activity and data flow on the serial line allow convenient monitoring of system operation.
Removable screw clamps are used for connection, making it easier to replace modules if necessary and simplifying maintenance.
- Network interface
Ethernet 10/100Base-T, Modbus TCP
Configuration via Telnet
RJ45 connector - Serial interface RS-485
Modbus RTU Master
Baud rate up to 115.2 Kbps
Distance up to 1200 m, up to 32 modules in multipoint - Removable terminal connection
- Signalling LED Link/Act Ethernet, serial RX-TX, power supply
- Galvanic isolation on 3-way
- Compliant with standards CE+EMC
- Suitable for DIN rail mounting EN-50022
Italiano
English