| Phases: | 3 |
| Type: | Power controller |
| Current Range: | 35A - 90A |
| Max Voltage: | 480V, 600V |
| Communication: | Modbus |
| Approvals: | CE / UKCA / EAC |
| Load: | Resistive / Inductive / IRSW / MoSi2 / SiC |
REVEX PA
SCR power controller with advanced functions
The REVEX are positioned between the two families REVO S and REVO C in terms of price and performance. The main characteristic is that they can be configured according to your needs by eliminating of all options that you do not want to use, in order to reduce the purchase price. It is an extremely flexible and performing unit.
It is suitable for controlling both normal resistive loads and short, medium or long wave infrared lamps. Compared to the REVEX 3PH series, it has junctions with a high I2T suitable for managing the current peaks typical of IRSW (ultra short) lamps even on the smallest sizes such as 35A and 50A.
- The unit can also be controlled through the analog input (4-20 mA / 0-10V) or via Modbus® serial communication.
- The microprocessor allows different firing modes including Burst Firing, Phase Angle, Delayed Triggering, Zero Crossing.
- The control can take place in Voltage, Current, Power or V2 and I2 with Transfer to VxI.
- Another feature of our unit is the integrated USB port to configure the instrument in safe mode, without the aid of the connected load and auxiliary voltage. During setup, the unit is powered directly via USB.
- SCR power controller with advanced functions
- Type of load: Normal resistors, short, medium and long wave infrared lamps
- Inputs: 4: 20mA, 0: 10V, SSR and Modbus® as standard
- Firing: Burst Firing, Phase Angle, Delayed Triggering, Zero Crossing
- Type of control: Voltage, Current, Power or V2 and I2 with Transfer to VxI
- Communication: RS485 port Modbus® RTU protocol
- USB: Integrated port for configuration in safe mode without the need for load and auxiliary voltage). The unit is powered via USB
- Dual Current Limit: For peak and RMS value
- Approvals: CE+EMC EAC compliant
REVEX PA – Order Code
Communication Module – Order Code
REVEX PA – Size and Dimensions
The USB port on the front of the unit allows the configuration of REVEX in a simple and safe way since the unit is powered by the USB port itself (load and auxiliary voltage not necessary).
Free Software to configure REVEX Unit:
The configuration is done via a normal USB 2.0 cable – male A type to male Micro-B (Order code if you buy it from us: USBMA-20-USBMMB) and through a free configuration software available at the link below.
Software:
| FILE NAME | DESCRIPTION | Link |
|---|---|---|
| Thyristor Configurator 6.0.6.4 | Thyristor Configurator Software REVEX 1/2/3PH, REVEX PA, REVO C 1/2/3PH, REVO PC v2, REVO PN v2, REVO PB, REVO RT/RTL, COMPACT, REVO TH |
Communication Manuals:
| DESCRIPTION | Link |
|---|---|
| TU-RS485-PDP_RVX14 – Addendum: REVEX Profibus for 14 Thyristor units Manual | |
| TU-RS485-PNTxRVXxx – Addendum: REVEX Profinet for 14 Thyristor units Manual | |
| Manual for REVEX Serial Communication |
PLC Files:
Please select the Communication Module
FAST TUNE
The all new powerful Thyristor Configurator Software allows you to configure all CD Automation products quickly and easily by using the FAST MODE. Simply select your application and the load type picture appears automatically, providing a list of suggested parameter settings. Depending on your application requirements, you can accept or make manual adjustments and when ready, download direct to the thyristor unit.
TEST UNIT
The TEST page is very useful when installing & commissioning CD Automation products as well as finding process issues or fine tuning at a later stage. You can read, write, enable and disable key values and parameters to test your load. Examples include; reading voltage, current and power values, or current limit status, changing input types between analog or SSR, control (feedback) modes V, I and VxI, or select firing types half cycle, single cycle, burst firing, delayed triggering, phase angle and soft start. The new ‘Load Analyzer’ (a small oscilloscope) can be activated from this page, see below.
LOAD ANALIZER
Provides real-time information of the output waveform, where you can select up to 10 process variables to help the operator determine if the waveform is in line with process expectations. Also useful for trouble shooting.
PROCESS VARIABLE LOGGING
The logging intervals are a fix value with non-programmable intervals.
REVEX PA – Documentation
Catalog
Manuali
Italiano
| NOME FILE | DESCRIZIONE | LINGUA | Link |
|---|---|---|---|
| Ita-REVEX-PA | Manuale d’uso REVEX PA (M-RXP-35-90) | ITA |
English
| FILE NAME | DESCRIPTION | LANGUAGE | Link |
|---|---|---|---|
| Eng-REVEX-PA | User Manual REVEX PA (M-RXP-35-90) | ENG |
Français
| NOM DE FICHIER | DESCRIPTION | LANGUE | Link |
|---|
Deutsch
| DATEINAME | BESCHREIBUNG | SPRACHE | Link |
|---|---|---|---|
| GER-REVEX-PA | Handbuch REVEX PA (M-RXP-35-90) | GER |
3D Model
Size: SR25