Select the SCR (thyristor) controller for Pure Resistive Elements on the Secondary of 1PH Transformer.
Transformer have inrush current on start up, for this reason special SCR Power Controller are required. For 1PH load is normally used REVO C with Current Limit option. REVO C Series include a wide number of options, with a focus on the communication. REVO C 1PH is available from 30 up to 2100A with CE or cUL us approval as an option. The new REVEX 1PH share the same technology of REVO C with a limitated number of options from 30 up to 280A.
SCR unit (Thyristor) for Purely Resistive load on the Secondary of a 1PH Transformer
CD Automation specialises in the optimisation of purely resistive load elements on the secondary side of a 1PH transformer. We offer advanced solutions that guarantee the precision, energy efficiency and durability essential for systems using these specific resistive loads. Choosing CD Automation means relying on technological excellence for optimal and innovative management.
Products |  |  |
| REVEX 1PH | REVO C 1PH | |
| LOAD | ||
| Load Voltage | 480-600V | 480-600V-690V* |
| Current Range | 30:280A | 30:2100A |
| INPUT | ||
| 4:20mA | X | X |
| 0:10V | X | X |
| 10K Pot. | X | X |
| FIRING | ||
| Phase Angle + Soft Start > 2 Sec. Current Limit setted to Nominal Current Value | X | X |
| Delayed Triggering (Low Inertia BF4, High Inertia BF50) | X | X |
| FEED BACK | CONTROL | ||
| V Voltage | X | X |
| OPTION | ||
| Fuses + Integrated Fuse Holder | X 30:40A | |
| Integrated Fuses | O >40A | X >40A |
| cUL us or UL | O | |
| COMMUNICATION/PROGRAM. | ||
| RS485 Modbus RTU | X | X |
| Profinet + Modbus TCP Ethernet | O | O |
| Config. Frontal Keypad | O | X |
| PC Win. Configurator | X | X |
| REVO KP3 Terminal | O | O |
X = Standard O = Option
*690V is available from 60 up to 2100A